How to Power a Car Subwoofer at Home?

How to power a car subwoofer at home and are you looking to give your car audio setup an extra boost? A car subwoofer can add some serious bass to your music, making every journey more enjoyable. But if you don’t have a lot of money to spend on a new system, or you just want to try out this type of speaker before committing, you may be wondering if it’s possible to power a car subwoofer at home.

The answer is yes – with the right equipment and know-how, it’s easy to get your car subwoofer sounding great in your living room or den. In this post, we’ll show you how to do it. Keep reading for tips on how to do just that!

What’s The Problem With Using A Car Subwoofer At Home?

The car subwoofers can be a risky thing to plug into your household outlets. If you do so, it is important that the power supply matches up with what’s being asked of 12volts and 120 volts AC each day – which means some people might not have enough juice for their speakers or electronics if they use this type of plug!

In order to make your car subwoofer work at home, you need DC power.

How to Power a Car Subwoofer at Home

The solution to your problem is quite simple, but it does require some hard work. Follow these steps below on how you can make sure that power will be sent straight from the battery into every speaker in order for them to all run simultaneously and produce clear sound without distortion or hesitation!

1- Purchasing a Power Inverter

The first step is to purchase a power inverter. This device converts the high current in your household outlet (120 volts) into a low voltage that woofers require – it has two plugs one for connecting with an audio signal cable and another just like regular outlets, but without any electricity going through them at all!

You need this piece of equipment before continuing on so make sure you get yours now…but don’t forget about plugging things together either; after purchasing everything else below will be easy as pie thanks again Technology!

2- Connecting The Car Subwoofer To A Car Amplifier

The next step is to connect your woofers and car amplifier. You need 12 or 16 gauge speaker wires for this connection depending on the specification of both components, which will be discussed in more detail later!

Now connect the wires to their respective brackets on your appliances. Strip one end of each wire and twist them together with red going through both layers for good measure, then do exactly reverse what was done before in order to make sure everything stays safe!

3- How to connect your car amplifier to your home stereo system.

When your car amplifier and subwoofer are connected to one another, it is time for you to connect them with the main speakers in order to make an awesome sound system.

To get the best sound from your subwoofer, connect it to an amplifier that has been pre-set with speaker wire. Connect one end of this cable to a positive (+) terminal on any car’s stereo unit and then continue by connecting another component’s black wires together near its white ones.

In order for both components to work properly together as well without creating too much noise or distortion during playback time!

4- Creating Connections with Other Speakers

The next step is to connect some of the best center speakers in order for your home sound system to have full range and enhanced bass. Make sure not to connect them with your car amplifier as this could cause distortion which would ruin its quality!

To create a powerful sound system, you need five speakers. Place two of the best outdoor ones on either side and then connect them with an RCA cable that goes into your television or computer’s AV input port for outputting audio through it onto something like carpeting below where people can dance in circles while listening to their favorite songs!

5- Connecting An Inverter

Finally, You can now use your car subwoofer with the household power supply. Just plug it in and connect one cable from their inverter outlet, then attach them both together at this point!

The sound will come out beautifully through all four speakers of your vehicle which makes for an awesome music experience while driving around town or even just sitting still on a busy street corner waiting patiently for the light to change!

If you want to know how to install a powered subwoofer to a factory stereo then click here to get guidance.

Disadvantages Of Using A Car Subwoofer At Home

Here are some of the advantages that come with powering your car subwoofer. For starters, you will have an expensive sound system in place which can cost anywhere between $40 and fifty dollars for one speaker alone!

In addition to this expense on hardware costs there is also installation labor involved so make sure not only do they know what they are doing during setup.

But how much power each individual component needs before starting any work associated with this task or else things may become frustrating quickly, especially if it’s something outside our control such as weather-related problems!


So, we have covered the topic of how to power a car subwoofer at home. You can now power your car subwoofer at home without fear of ruining it or blowing a circuit breaker. The only thing left to do is enjoy those deep bass tones while watching your favorite movie or listening to your favorite album.

Before you go, we want to know if you’ve ever tried using a car subwoofer at home. What were some of the problems you encountered?

Let us know in the comments below and be sure to share this article with your friends and family who might also want to try powering their subs at home.

Leave a Comment