9 BEST CAR AMPLIFIER FOR MIDS AND HIGHS

The car amplifier should be as close to your ear as possible. That way it can amplify all frequencies equally. The higher frequencies are the ones that are further away from your ear and therefore they will not be affected by the amplifier.

This post introduces the best car amplifier for mids and highs in 2023. We have chosen these products based on their sound quality, design, and features.

9 BEST CAR AMPLIFIERS FOR MIDS AND HIGHS REVIEWS 2023

There are many types of amplifiers available when it comes to car audio. The best car amplifier for mids and highs are the ones that have a wide range of frequencies that they can cover. Most of these amplifiers are designed for midrange and high frequencies.

Some amplify the low end, some amplify the mids, and some amplify the high end. Each type of amplifier is designed to amplify a certain frequency range.

TOP RATED CAR AMPLIFIERS FOR MIDS AND HIGHS:

Rockford Fosgate P400X4

9.7/10

• 4 Channel Amplifier
• 400 Watt
• 12 Volts
• LxWxH: 5.8 x 12 x 17 inches
• Mounting Type: Car Mount

Kenwood KAC-M3004

9.5/10

• 600W
• 4-Channel
• Item Dimensions LxWxH(6.69 x 3.15 x 5.91 inch)
• Mounting Type: Car Mount
• Selectable corossover modes

Planet Audio AC1600.4

9.1/10

• 1600W
• 4 Channel
• MOSFET Power Supply
• Low and High-Level Inputs
• Depth 13.5" x Width 10" x Height 2.4"

We reviewed the best car amplifier for highs and mids. They are all in a very affordable price range and they are best for your cars. Let’s see which one is better for you.

How Do We Review Products for Our Clients?

1. BEST CLASS AMP FOR MIDS AND HIGHS

The PA D5000.5 car amplifier is designed to deliver a powerful and pristine sound reproduction. The power supply is made of high-quality steel. It has a high-performance Class-D power amplifier. You get a preamp input with dedicated volume control.

In addition, it has R.C.A. jacks for the speaker connection. The amplifier is designed for vehicles. It uses high-power, low-distortion components. A high-speed MOSFET switching power section provides stable power for various electronic devices. Nickel-plated wire terminals provide corrosion resistance.

The stainless steel hardware is sure to last for years and years and the nickel-plated connectors and terminals ensure that these speakers will not rust the outdoors. You can also rest assured that the wires will not get loose or break over time as these speakers are made to be used in a harsh environment.

Pros

• Stainless steel hardware
• Short circuit protection
• High-speed MOSFET switching power
• Adjustable low and high pass frequency

Cons

• A bit expensive

Sample Customer Review:

“I have looked at all the reviews and the one star reviews are comical and sounds as if they dont know what they are doing or hooking up with garbage wires or dont understand how ohms works this amp is awesome and to only push 500 watts from the sub makes all cheap 1000 watt amps (boss , Pyle , crunch ect) sound like false advertisements I got this thing hooked to a 15 inch kicker and 4 polk component 6.5 with tweets and this may be one of the best systems I’ve had in the 25 years that I have been dealing with car amps”

2. ROCKFORD FOSGATE MIDS AND HIGHS AMPLIFIER

The Rockford Fosgate P400X4 Punch 400 Watt 4 Channel Amplifier is a fully-powered, full-range amplifier. With this high-power amp, you will have no problem achieving maximum sound volume with your speakers. The power supply is protected by heavy gauge wiring, and the fuse block provides additional protection.

The amplifier’s design features a stealth top-mounted control panel with a large volume knob for easy control and operation. The amplifier offers C.L.E.A.N. Set-up, Punch EQ, Multi-Signal Inputs, and a wide variety of features to give you a wide range of sonic options.

The P400X4 delivers clean, punchy sound at high volume levels in any application with its 400 watts, full-range, bi-amplified power. Four channels offer versatile connections to four speakers and an array of inputs, and the new 12dB/octave Butterworth crossover provides precise control over signal dynamics.

The speaker wire gauge is 8 A.W.G. to 18 A.W.G. for easy connection to the 18AWG speaker wire. The P400X4 is a true powerhouse that will satisfy even the most demanding audio system.

Pros

• Cast Aluminum Heatsink
• Stealth top-mounted control panel
• Class A/B topology
• R.C.A. inputs

Cons

• Durability has some concerns

Sample Customer Review:

“Got this in yesterday and to my surprise the birth sheet was 821 watts! Running 2 sets of alpine type r 6.5 components at 4 ohms, my soundstream 4.560 was louder at 4 ohms but the sound quality on this is way cleaner. It is 3 times the price but you get what you pay for! The set up was kind of confusing at first with the clean set up, but found out my radio does not distort even at max volume, after that it was easy.

Very clean look and for being 1/2 the size of my other amp it weighs a lot more. Sounds just as good as my wife’s jl 700/5 xd but a lot cheaper. After breaking this in i read more and turned the punch eq up that also works on the hpf if you read instructions, after turning this up 1/2 way i can turn my stereo up 1/2 way and it is loud! So if you purchase it before you think its not loud play with the settings before thinking something is wrong.

Just bought the t1 6/9′, and t1 component 6.5’s to match. Update this review once thats done to see how they match up with this amp soundwise.”

3. NVX MIDS AND HIGHS AMPLIFIER

Designed for the ultimate marine and car audio enthusiast, the NVX VAD10004 1000W R.M.S. full range class D 4-channel amplifier is the choice for today’s marine and car enthusiasts. A high-end power amplifier that provides a total output of 1000 Watts R.M.S. for complete audio reproduction and clarity at any volume.

This is the latest generation in marine and car amplifiers, providing superior sound and tone quality for marine and car audio enthusiasts. The 3-way protection circuitry provides complete protection against power surges, power failures, and shorts. With a massive heat sink, the amplifier is built to last a lifetime by driving the ultimate in audio reproduction.

The internal circuitry is protected by a high-quality electrolytic capacitor, while a rugged solid state F.E.T. transistor protects the input circuits. The internal power supply and other components are protected with a heavy-duty aluminium heat sink, while the output transformer is protected with a heavy-duty copper braid.

All internal components are tightly sealed within the unit and are protected from the elements.

Pros

• L.E.D. indicator lighting
• Platinum-plated R.C.A. level inputs
• Platinum-plated screw terminals
• Platinum-plated screw terminals

Cons

• Sometimes it may heats up but not overheating

Sample Customer Review:

“Using this amp to drive 2 Rockwood K9 6.5 sub-woofers wired to 1 ohm on my boat. Sound amazing and puts out good power. The only complaint I have about the amp is the mounting screws on the bracket on the power side are horribly placed. Not possible to screw in without removing the bracket from the amp first which is a poor design and tedious. Not to mention very difficult in the small place that I mounted the amp in.

I managed to pre-run the wires through the bracket on the one end and mount the bracket then screw the bracket back on to the amp. Not recommended to do with the wires being live connected to the battery though as would be easy to create a short since the bracket is metal.

Other than that I absolutely love the power and size of the amp. I would definitely recommend to anyone. Just hope the improve the mounting bracket on next version. Does get a little warm to the touch after a while on full volume , but not super hot.”

Also Read: How to Remove Humming Noise From Car Amplifier?

4. MTX AUDIO THUNDER MIDS AND HIGHS AMPLIFIER

The THUNDER 75.4 car amplifier is built around a new state-of-the-art Class A/B amplifier topology. It is the result of a very intense two years of R&D, which has resulted in a fully functional design with a truly exceptional sound. The THUNDER75.4 amplifier delivers deep, punchy bass with an incredibly tight and precise mid-range.

The THUNDER75.4 amplifier also offers excellent tonal characteristics and a wide dynamic range. These attributes make it ideal for many different listening styles. Whether it is used for home entertainment, as an extension of your existing stereo, or simply for commuting to and from work. The amplifier is designed to be your go-to choice for a great-sounding, class-leading car audio solution.

The MTX Audio Thunder75.4 Thunder Series Car Amplifier is a Class A/B topology amplifier with variable low pass and high pass filters, allowing the user to select the appropriate filter settings for the source material and the final application.

The amplifier is a small footprint surface mount device that utilizes a single 8" (200mm) speaker terminal to bi-wire both speakers in an automobile. The amplifier is constructed with a small footprint, providing excellent signal path quality with minimum impedance discontinuity. An amplifier is a compact unit with a small footprint design.

Pros

• Class A/B Topology
• Variable L.P.F. and HPF
• Surface Mount P.C.B.
• Small Foot Print Design

Cons

• The amplifier isn’t waterproof

Sample Customer Review:

“MTX continues to impress. Just what I’ve come to expect from MTX…this amp has the basics, they don’t put a bunch of unneeded extras. Just more to go wrong on competing amps but this thing gives all the punch it advertises (probably puts out a bit more than advertised rms). If you don’t require a bass knob this is a great amp. Small form factor with good sound and power delivery.”

5. BEST MIDS AND HIGHS CAR AMPLIFIER

Kenwood KAC-M3004 Digital Amplifier (DA) is the best compact high-performance amplifier for your home and car audio system. This amplifier is the perfect combination of sound quality and valu

e. It has a high power of 600 watts peak power, four high-quality stereo channels, and 50 watts R.M.S. per channel.

These Kenwood amplifiers feature line-level inputs and outputs and conformal coating on the circuit board, allowing you to connect almost any equipment that uses standard R.C.A. jacks.

Kenwood’s compact amplifier boasts plenty of power with a 600-watt peak output. The amplifier features 50 watts of R.M.S. per channel, line-level inputs, and a 50-watt input to bridge the signal to another amplifier or subwoofer. It also has a conformal coating on the circuit board for superior audio quality.

Pros

• Conformal coating on the circuit board
• 50 watts R.M.S. per channel
• Signal sensing turn-on

Cons

• It does not include a harness

Sample Customer Review:

“Amazing little thing this is, I’m pushing (2) Skar PAX 6.5 with skar tw 1” tweeters on Crossovers in the rear, and (2) D4S-60 6.5 with skar tws 1" tweeters on Crossovers in the front, and it’s sounds amazing. Using a stock uconnect 8.4 and you wouldn’t know it was on a stock radio with the sound output.

Hands down the best mini amp out there. Blow the fuse on it once when I had it wire bridged, then changed it to a Tru 4 channel and on issues. So keep that In mind if you’re blowing fuses."

6. ALPINE MIDS AND HIGHS CAR AMPLIFIER

Alpines compact class D power pack 4 Channel amplifier has a simple, elegant design that fits right in with any room in your home. Its compact, portable form factor makes it perfect for various situations, including car audio systems. You’ll enjoy an extremely clean, powerful, and crisp sound.

It has a universal power supply input so you don’t need to worry about using the right cord for the right outlet. The Alpine KTP-445U offers stereo R.C.A. output jacks, and there is an optional R.C.A. line input jack, allowing you to connect external amplifiers or sources.

Pros

• Universal plug
• Easy-to-install
• Auto-Sensing-Speaker level connectors
• The unbelievably low noise floor

Cons

• Not found yet

Sample Customer Review:

“So far it’s a nice little amp. I was able to fit it under the original radio in my dash and I’ve been playing it pretty loud because it’s a convertible and it doesn’t cut out and it’s plenty loud. Make sure that the speaker / low level or RCA switches set correctly for your set up.

I forgot to do mine and it was slightly overdriven but sounded perfect after I remembered to switch it to speaker since I’m using the factory radio and wiring”

ALSO READ: HOW TO ADJUST CAR AMPLIFIER SETTINGS?

7. JBL STAGE MIDS AND HIGHS AMPLIFIER

The J.B.L. Stage A6004 amplifier is a compact, value-engineered amplifier. This amp delivers an astonishingly detailed, powerful sound with a compact footprint. It is protected by a robust circuit boa

rd, which contains the full complement of protections, including over-voltage, short circuit, and under-voltage protection. It has an input level control, switchable bass E.Q. crossover mode, and switch crossover control.

An onboard gain structure provides the right amount of headroom to deliver a pristine signal for recording and playback while protecting the amplifier from power spikes or peaks.

Plus, the high-quality components used throughout the amplifier yield exceptionally clean and transparent sound, with none of the annoying buzz and noise that plagues inexpensive products. All of these features are made possible with an output transformer that eliminates unwanted hum.

Pros

• Onboard protection
• Input level control
• Switchable bass E.Q. crossover mode
• 4 CHannel amplifier

Cons

• It becomes rusty if we don’t care for it.

Sample Customer Review:

“I was replacing the stock radio and speakers in my truck and needed an amplifier to power the new subwoofer. I wasn’t looking to go bouncing down the road with bass (did a little of that in my younger years). Just wanted something to add enough punch to properly round out the music, so I bought a small shallow mount Kenwood 8” suibwoofer and this amp. The amp fit easily under my seat and was plenty enough power for my needs. The sound is pretty awesome. Good product if you’re in a similar situation"

8. BEST AMP FOR MIDS AND HIGHS

This Rockville dB45 R.M.S. 4 Channel Amplifier has the power to handle professional sound reinforcement needs. It features four channels with 200 watts per channel, and each channel has unique independent control of bass mid and treble frequencies. You can also select the channels individually to operate independently or all together as a stereo amplifier.

The Rockville dB45 3200W/800w R.M.S. 4-channel amplifier includes various feat

ures for your convenience. It has differential circuitry that can easily change the center frequency of the Crossover. The Crossover has a wide range of adjustments for maximum flexibility.

This Rockville dB45 amplifier has a variable bass control that allows you to set the level of the bass, mid and treble to create the perfect sound for your specific music.

This Rockville dB45 amplifier will protect your equipment from surges and damage with a full I.C. controlled protection circuitry. It has an indicator to tell you if there is a problem. When it’s time to shut down, it’s easy with the soft start feature. It has a delay soft start feature, which provides the best sound quality with minimal distortion.

Pros

• MOSFET Power Supply
• Tertiary Supplies Circuitry
• Class “A.B.” Technology
• 12dB Bass Equalizer
• Mute and Delay Soft Start System
• 8 Volt Preamp Circuitry

Cons

• It gets hot, but not often

Sample Customer Review:

“This amp sounded good on my doors but when I decided to sell my amp that my subs were on I put the door speakers back on the head unit and put the subs on the amp. Could not bridge or it would go into protect and wouldn’t come out so I put each voice coil to its own channel and it plays good but if I turn it up past 10 and play it for a few seconds it goes into protect and won’t come out until I turn the truck off and back on and its not the wiring, any way I wire it it does this. However on door speakers or mids/highs it does perfect and sounds great would recommend for that only not subs”

9. 4 CHANNEL AMP FOR MIDS AND HIGHS

AC1600.4 1600W is a full-range, class-A / B, power amplifier that can drive any speaker system at high volumes. It has 4 inputs, 2 high-level and 2 low-level inputs, allowing you to connect a wide variety of equipment to the amplifier. You can even select between the four channels to connect an additional subwoofer.

It also has a high-current MOSFET power supply that can handle the most demanding power requirements. To protect the input transistors, AC1600.4 features a variable low-pass filter that allows you to customize the amplifier’s response according to your needs.

It is a high-performance amplifier that is built for car audio applications. It is capable of driving any subwoofer or speaker and features 6 years platinum online warranty.

Pros

• 6 Year Platinum Online Dealer Warranty
• Blue Backlit Illumination
• Remote Subwoofer Control
• Class A / B Topology

Cons

• It doesn’t have a built-in fan

Sample Customer Review:

“Don’t know why people are saying not good for subs I got it pushing 2 pb 10s and 2 6.5 alpine type s door speakers and it’s perfectly fine . Bridged 3 and 4 on subs and 1 and 2 on the door speakers . Read the product description it’s a great amp if u wire it right”

Also Read: What are the causes that make a car amplifier hot

FAQS:

Q. 1 WHAT FREQUENCY ARE MIDS AND HIGHS?

It depends on what frequency you are hearing, but generally speaking, the speaker’s mid-range will be between 80 and 200 Hz and the high range will be between 2,000 and 6,000 Hz.

Q. 2 WHICH AMPLIFIER FEATURES ARE CONSIDERED FOR MIDS AND HIGHS FOR THE CAR AMPLIFIER?

The mid-range and high frequencies are usually considered the most important. So If you’re using a power amp for your mids and highs, the amp should be capable of handling high amounts of power. Good load capacity is a must-have. For instance, if you were using your power amp for your sub, it would need to have a better load capacity than if you were using it to drive your car speakers.

So what exactly is the load capacity? The load capacity is the amount of power that the power amp can handle. A good power amp will have a load capacity of about 50 watts or more.

Q. 3 WHAT AMPLIFIER SIZE IS REQUIRED FOR HIGHS?

A lot depends on what kind of amplifier you have. If it’s a solid-state amp with a small transformer (about 4 ohms) then a 10-watt amp will work fine.

Q. 4 WHAT CLASS AMPS WORK BEST FOR MID AND HIGH FREQUENCIES?

Class A and B amplifiers are best for mid and high frequencies. This is due to the lack of capacitance in the input section. Capacitance helps absorb noise, which reduces distortion. Capacitance is also better at absorbing low frequencies. If the capacitor is large, it will not respond well to very low-frequency signals. It can cause oscillation.

Q. 5 SHOULD YOU USE AN AMPLIFIER FOR YOUR MIDS AND HIGHS?

Yes, using an amplifier for your mids and highs will make your sound much more clear and more punchy. We would recommend getting an amplifier with gain control to turn up the mids and lows without sacrificing any of the highs or mids.

CONCLUSION:

In this article, we have discussed the best car amplifier for mids and highs. These amplifiers are very handy for car lovers because they help enhance the audio quality of your music. These amplifiers are very affordable as compared to other amplifiers.

So, you can go for these amplifiers without worrying about their price. Also, if you want to buy a better car amplifier, then you can check out our product review here.